Agilent Technologies 8960 Series Reference Manual page 696

Printing Screens
Figure 22. Accessing Your Computer's LAN Settings
Select the entry for
your Ethernet
network adapter,
then...
select Properties to
list the TCP/IP
settings for your
adapter.
Set the IP Address and Subnet Mask
1. Select the IP Address tab on the TCP/IP Properties screen.
2. Select Specify an IP Address.
3. Enter the IP Address for the computer. Remember, the last entry in the IP Address must not be >254 or 0.
4. Enter the Subnet Mask (255.255.248.0).
696
S:\Hp8960\E1962B CDMA 2000\Pi Release\Reference Guide\Chapters\cdma2000_gen_print_screen.fm