Agilent Technologies 8960 Series Reference Manual page 581

STATus:OPERation:CALL:COMMon Condition Register Bit Assignment
The STATus:OPERation:CALL:COMMon register bits will be used to indicate status of processes that occur
during normal call processing operations.
Bit Binary
Number Weighting
15 32768
14 16384
13 8192
12 4096
11 2048
10 1024
9 512
8 256
7 128
6 64
5 32
4 16
3 8
2 4
1 2
0 1
Condition
Not Used. Defined by SCPI.
Data Summary
Call Control Status Access Probe
Call Control Status Set Up
Request
Call Control Status Releasing
Call Control Status Paging
Registering (BS initiated)
Reserved for future use.
BS Originating
Call Control Status Changing
Call Control Status
Handover/Handoff
Call Control Status Registering
Call Control Status is "Alerting"
Call Control Status is "Connected"
Call Control Status is "Idle"
Extension Bit
S:\Hp8960\E1962B CDMA 2000\Pi Release\Reference Guide\Chapters\cdma2000_hpib_status_operation.fm
Description
This bit is always 0.
This bit is the summary message bit for the
STATus:QUEStionable:CALL:GSM:DATA register.
This bit is a 1 when the test set is in the call control
status access probe state.
This bit is a 1 when the test set is in the call control
status set up request state.
This bit is a 1 when the test set is in the call control
status releasing state.
This bit is a 1 when the test set is in the call control
status paging state.
This bit is set to a 1 when the Base Station initiates
registration.
This bit is always 0.
This bit is a 1 when:
• Active Cell mode - the call processing state
leaves the idle state
• Test mode - the test set has noted a base station
origination.
This bit is a 1 when the test set is in the call control
status changing state.
This bit is a 1 when the test set is in the call control
handover or handoff state.
This bit will be a 1 when the test set is in the call
control status registering state.
This bit is a 1 when the test set is in the call
alerting state (ringing).
This bit is a 1 when the test set is in the call
connected state.
This bit is a 1 when the test set is in the call idle
state.
This bit is always 0.
STATus:OPERation:
581