Agilent Technologies 8960 Series Reference Manual page 469

FETCh:WQUality:ICOunt?
Function Queries the intermediate count of measurements completed in a multi-measurement.
Query Range: 0 to 999
Programming Example
OUTPUT 714;"FETCH:WQUALITY:ICOUNT?"
FETCh:WQUality:CDPower:IQINactive[:FAIL]?
Function Queries the code domain measurement's pass/fail result indicating whether the
power level in the inactive code channels exceeded the level set using the
"SETup:WQUality:CDPower:IQINactive[:LIMit]"
Query Range: 0|1, 9.91 E+37
0 = passed, 1 = failed, 9.91 E+37 = undefined
Programming Example
OUTPUT 714;"FETCH:WQUALITY:CDPOWER:IQINACTIVE:FAIL?"
FETCh:WQUality:CDPower:ICHannel[:ALL]?
Function Queries the I-channel code domain power measurement results for all 16 measurement graph
bars (bins).
This query returns a string consisting of 64 comma-separated values. These represent 4 values
for each of 16 bins (maximum).
Since measurements will usually have less than 16 bins, higher numbered bins frequently return
9.91 E+37 results.
Query "FETCh:WQUality:CDPower:ICHannel:ALL?" returns: 1 (active) or 0 (inactive), Walsh code,
spread factor, and power for bin 0. The integer value following power for bin 0 will be the
beginning of bin 1; 1 (active) or 0 (inactive), Walsh code, spread factor, and power for bin 1. This
pattern will repeat until the values for the last bin (bin 15) have been returned.
Programming Example
OUTPUT 714;"FETCH:WQUALITY:CDPOWER:ICHANNEL:ALL?"
command.
S:\Hp8960\E1962B CDMA 2000\Pi Release\Reference Guide\Chapters\cdma2000_hpib_fetch_wquality.fm
FETCh:WQUality
469