Agilent Technologies 8960 Series Reference Manual page 538

SETup:DAPower
SETup:DAPower:COUNt:STATe
Function Sets/queries the multi-measurement state of the digital average power measurement.
Setting Range: 1|ON|0|OFF
Query Range: 1|0
*RST Setting 0 (off)
Programming Example
OUTPUT 714;"SETUP:DAPOWER:COUNT:STATE ON" !Turns on multi-measurements.
SETup:DAPower:TIMeout[:STIMe]
Function The setting form of this command performs two functions: (1) sets the digital average power
measurement's timeout value, and (2) sets the digital average power measurement's timeout
STATe to 1 (on).
The query form returns the channel power measurement's timeout value.
Setting Range: 1 to 999 seconds
Resolution: 1 second
Query Range: 1 to 999
*RST Setting 10 seconds, on
Programming Example
OUTPUT 714;"SETUP:DAPOWER:TIMEOUT:STIME 5S"
!Sets timeout state to ON and sets the timeout time to 5 seconds.
SETup:DAPower:TIMeout:STATe
Function Sets/queries the digital average power measurement's timeout state.
Setting Range: 1|ON|0|OFF
Query Range: 1|0
*RST Setting 0 (off)
Programming Example
OUTPUT 714;"SETUP:DAPOWER:TIMEOUT:STATE ON"
538
S:\Hp8960\E1962B CDMA 2000\Pi Release\Reference Guide\Chapters\cdma2000_hpib_setup_dapower.fm