Agilent Technologies 8960 Series Reference Manual page 408

CALL:TRAFfic
CALL:TRAFfic:LEVel[:SELected]
Function Sets/queries the level of the forward traffic channel.
NOTE
Setting Range: 0 to -30 dB
Resolution: 0.01 dB
Query Range: 0 to -30 dB
Resolution: 0.01 dB
*RST Setting -15.6 dB
Programming Example
OUTPUT 714;"CALL:TRAFfic:LEVEL:SELECTED -10 dB"
CALL:TRAFfic:STATe[:SELected]
Function Sets/queries the on/off state of the forward traffic channel.
NOTE
Setting Range: 1|ON|0|OFF
Query Range: 1|0
*RST Setting ON
Programming Example
OUTPUT 714;"CALL:TRAFfic:STATE:DIGITAL95 OFF"
!Turns off the forward traffic channel.
CALL:TRAFfic:WALSh
Function Sets/queries the Walsh code used for the DIGital95 traffic channel.
Setting Range: CODE10|CODE14|CODE26|CODE30|CODE42|CODE46|CODE58|CODE62
Query Range: CODE10|CODE14|CODE26|CODE30|CODE42|CODE46|CODE58|CODE62
*RST Setting CODE10
Programming Example
OUTPUT 714;"CALL:TRAFfic:WALSH CODE14"
!Sets the forward traffic channel walsh code to 14.
408
S:\Hp8960\E1962B CDMA 2000\Pi Release\Reference Guide\Chapters\cdma2000_hpib_call_traffic.fm
This command applies to IS-95 traffic channel only. To make level changes to the
IS-2000 fundamental channel, see
This command applies to IS-95 traffic channel only. To make on/off state changes to
the IS-2000 fundamental channel, see
"CALL:FCHannel:LEVel[:SELected]"
"CALL:FCHannel:STATe[:SELected]"