Analog Input Bias 1 (Avi); Analog Input Bias 1 (Aci); Analog Input Bias 1 (Aui) - Delta Electronics AC Motor Drive VFD-VE Series User Manual

Chapter 4 Parameters|
03-00~02=9
Regenerative
torque limit
03-00~02=10
Positive/negative torque limit
Reverse
03-00~02=10
Positive/negative torque limit
03-00~02=8
Negative torque limit
03-03

Analog Input Bias 1 (AVI)

Control
VF VFPG
mode
Settings
It is used to set the corresponding AVI voltage of the external analog input 0.
03-04

Analog Input Bias 1 (ACI)

Control
VF VFPG
mode
Settings
It is used to set the corresponding ACI voltage of the external analog input 0.
03-05

Analog Input Bias 1 (AUI)

Control
VF VFPG
mode
Settings
It is used to set the corresponding AUI voltage of the external analog input 0.
03-06 Positive/negative Bias Mode (AVI)
03-07 Positive/negative Bias Mode (ACI)
03-08 Positive/negative Bias Mode (AUI)
4-80
Positive torque
SVC FOCPG TQRPG
-100.0~100.0%
SVC FOCPG TQRPG
-100.0~100.0%
SVC FOCPG TQRPG
-100.0~100.0%
Negative Torque
03-00~02=7
Positive torque limit
Forward
03-00~02=9
Regenerative
torque limit
Factory setting: 0
Factory setting: 0
Factory setting: 0
Revision August 2008, 03VE, SW V2.04
Unit: 0.1
Unit: 0.1
Unit: 0.1