Frequency For Smart Start; Accel. Time For Smart Start; Broken Belt Detection; Min. Line Speed Of Broken Belt Detection - Delta Electronics AC Motor Drive VFD-VE Series User Manual

Settings
08-57

Frequency for Smart Start

Control
VF VFPG
mode
Settings
08-58

Accel. Time for Smart Start

Control
VF VFPG
mode
Settings
When the speeds of wider/unwinder and tractor can't match at start-up, the situation can be
improved by setting Pr.08-57 and Pr.08-58.
08-59

Broken Belt Detection

Control
VF VFPG
mode
Settings
08-60

Min. Line Speed of Broken Belt Detection

Control
VF VFPG
mode
Settings
08-61 Allowance Error of Line Speed of Broken Belt Detection
Control
VF VFPG
mode
Settings
08-62 Detection Time of Broken Belt
Control
VF VFPG
mode
Settings
When the broken belt detection is enabled, line speed is higher then Pr.08-61, allowance error
of line speed of broken belt detection exceeds Pr.08-61 and detection time of broken belt
exceeds Pr.08-62, the broken belt occurs.
08-63 Allowance Error Level of Tension/Line Speed PID Feedback
Revision August 2008, 03VE, SW V2.04
0.0~100.0% (according to Pr.08-26)
SVC FOCPG TQRPG
0.00~600.00Hz
SVC FOCPG
0.01~600.00 sec
SVC FOCPG
0 Disable
1 Enable
SVC FOCPG
0.0~3000.0 m/min
SVC FOCPG
1.0~6000.0 mm
SVC FOCPG
0.00~100.00 sec
Chapter 4 Parameters|
Factory Setting: 2.00
Factory Setting: 3.00
Factory Setting: 0
Factory Setting: 0.0
Factory Setting: 100.0
Factory Setting: 1.00
Unit: 1
Unit: 0.01
Unit: 0.1
Unit: 0.1
Unit: 0.1
Unit: 1
4-133