Rotor Resistance R1 Of Motor 1; Lm Of Motor 1; Lx Of Motor 1; Motor 1/Motor 2 Selection - Delta Electronics AC Motor Drive VFD-VE Series User Manual

05-06

Rotor Resistance R1 of Motor 1

Rr of Motor 1
05-07
Control
SVC FOCPG TQRPG
mode
Settings
05-08

Lm of Motor 1

05-09

Lx of Motor 1

Control
SVC FOCPG TQRPG
mode
Settings
05-10

Motor 1/Motor 2 Selection

Control
VF VFPG
mode
Settings
It is used to set the motor that driven by the AC motor drive.
Frequency for Y-connection/ Δ−connection Switch
05-11
Control
VF VFPG
mode
Settings
05-12
Y-connection /Δ−connection Switch
Control
VF VFPG
mode
Settings
Delay Time for Y-connection/Δ −connection
05-30
Control
VF VFPG
mode
Settings
Pr.05-12 is used to enable/disable Y-connection/ Δ−connection Switch.
When Pr.05-12 is set to 1, the drive will select by Pr.05-11 setting and current motor frequency
to switch motor to Y-connection or Δ−connection.  A T the same time, it will also affect motor
parameters (Pr.05-01 to 05-10/Pr.05-13 to Pr.05-21).
Pr.05-30 is used to set the switch delay time of Y-connection/Δ −connection.
Revision August 2008, 03VE, SW V2.04
0~65.535Ω
0~6553.5mH
SVC FOCPG TQRPG
1 Motor 1
2 Motor 2
SVC FOCPG TQRPG
0.00 to 600.00Hz
SVC FOCPG TQRPG
0 Disable
1 Enable
SVC FOCPG
0 to 60.000
Chapter 4 Parameters|
Factory setting: #.###
Factory setting: #.#
Factory setting: 1
Factory setting: 60.00
Factory setting: 0
Factory setting: 0.200
Unit: 0.001
Unit: 0.001
Unit: 0.1
Unit: 0.1
Unit: 0.01
Unit: 0.001
4-89