B.8.3 Emv-Pg01L - Delta Electronics AC Motor Drive VFD-VE Series User Manual

B.8.3 EMV-PG01L

PG OUT
pulse output
AB2: PG2 signal
mode switch
ABZ1: PG1 signal
mode switch
1. Terminals descriptions
Terminal
Symbols
VP
DCM
A1, A1
B1, B1
Z1, Z1
A2, A2
B2, B2
A/O, B/O, Z/O
2. Wiring Notes
a.
Revision August 2008, 03VE, SW V2.04
pulse feedback
Power source of EMV-PG01L
Output Voltage: +5V±5% 200mA
Power source and input signal common
Input signal. Input type is selected by ABZ1. It can be 1-phase or 2-
phase input. Maximum 300kP/sec
Input signal. Input type is selected by AB2. It can be 1-phase or 2-
phase input. Maximum 300kP/sec
Output signal. It has division frequency function (Pr.10-16), Line
driver: max. output DC5V 50mA
Grounding
Please use a shielded cable to prevent interference. Do not run control wires
parallel to any high voltage AC power line (200 V and above).
Appendix B Accessories|
PG1
pulse input
Descriptions
PG2
B-25