Allowance Error Detection Time Of Tension Pid Feedback; Error Treatment Of Tension Pid Feedback; Upper Limit Of Tension Pid Feedback; Lower Limit Of Tension Pid Feedback - Delta Electronics AC Motor Drive VFD-VE Series User Manual

Chapter 4 Parameters|
Control
VF VFPG
mode
Settings
The corresponding value for the 100% of dancer is 10V.
08-64

Allowance Error Detection Time of Tension PID Feedback

Control
VF VFPG
mode
Settings
08-65

Error Treatment of Tension PID Feedback

Control
VF VFPG
mode
Settings
When the error of tension PID target value and tension PID feedback exceeds Pr.08-63 and
the allowance error detection time of tension PID exceeds Pr.08-64, tension PID feedback
error occurs. Refer to Pr.08-65 for error treatment of tension PID feedback.
08-66

Upper Limit of Tension PID Feedback

Control
VF VFPG
mode
Settings
08-67

Lower Limit of Tension PID Feedback

Control
VF VFPG
mode
Settings
08-68 Reserved
08-69 DFM Selection
Control
VF VFPG
mode
Settings
08-70 Low-pass Filter Time of Line Speed
Control
VF VFPG
mode
4-134
SVC FOCPG
0~100%
SVC FOCPG
0.0~10.0 sec
SVC FOCPG
0 Warn and keep operation
1 Warn and coast to stop
2 Warn and ramp to stop
SVC FOCPG TQRPG
0.0~100.0%
SVC FOCPG TQRPG
0.0~100.0%
SVC FOCPG TQRPG
0 Output frequency
1 Frequency command
SVC FOCPG TQRPG
Factory Setting: 100
Factory Setting: 0.5
Factory Setting: 0
Factory Setting: 100.0
Factory Setting: 0.0
Factory Setting: 0
Factory Setting: 0.00
Revision August 2008, 03VE, SW V2.04
Unit: 0.1
Unit: 0.1
Unit: 0.1
Unit: 0.01