Accel./Decel. Time Selection Of Stall Prevention At Constant Speed; Over-Torque Detection Selection (Ot1); Over-Torque Detection Level (Ot1) - Delta Electronics AC Motor Drive VFD-VE Series User Manual

06-05

Accel./Decel. Time Selection of Stall Prevention at Constant Speed

Control
VF VFPG
mode
Settings
It is used to set the accel./decel. Time selection when stall prevention occurs at constant
speed.
06-06

Over-torque Detection Selection (OT1)

Control
VF VFPG
mode
Settings
06-07

Over-torque Detection Level (OT1)

Control
VF VFPG
mode
Revision August 2008, 03VE, SW V2.04
Over-Current Stall
Prevention during
Operation, output
Over-Current
frequency decrease
Detection Level
06-04
over-current stall prevention during operation
SVC
0 by current accel/decel. time
st
1 by the 1 accel/decel. time
nd
2 by the 2 accel/decel. time
rd
3 by the 3 accel/decel. time
th
4 by the 4 accel/decel. time
5 by auto accel/decel. time
SVC FOCPG TQRPG
0 Over-Torque detection disabled.
1 Over-torque detection during constant speed operation, continue to
operate after detection
2 Over-torque detection during constant speed operation, stop
operation after detection
3 Over-torque detection during operation, continue to operate after
detection
4 Over-torque detection during operation, stop operation after
detection
SVC FOCPG TQRPG
Chapter 4 Parameters|
Output Current
Output
Frequency
Time
Factory Setting: 150
Factory Setting: 0
Factory Setting: 0
Unit: 1
4-97