Hard disk drive (HDD) / solid state disk (SSD)
Concluding steps
▶
"Reassembling" on page
▶
"Connecting the power cord" on page
▶
"Switching on the server" on page
▶ Update the system information of your server using the Chassis ID Prom
Tool, see
"Using the Chassis ID Prom Tool" on page
corresponding system name.
▶
"Resuming BitLocker functionality" on page
7.6.3
Replacing the HDD/SSD backplane or PCIe SSD
on the 8x 2.5-inch HDD/SSD extension box
Upgrade and Repair Unit
(URU)
Tools:
Phillips PH2 / (+) No. 2 screw driver
Preliminary steps
▶
"Locating the defective server" on page
▶
"Shutting down the server" on page
▶
"Disconnecting the power cord" on page
▶ Remove all HDD/SSD modules from the HDD extension box, see
"Removing 2.5-inch HDD/SSD modules" on page
▶
"Getting access to the component" on page
▶ Unlock and pull the 8x 2.5-inch HDD/SSD extension box out of its
installation bays, see
on page
248.
Removing the defective HDD/SSD backplane
8x 2.5-inch HDD/SSD backplane
250
66.
79.
81.
47.
"Removing the 8x 2.5-inch HDD/SSD extension box"
Upgrade and Maintenance Manual
126. Select the
121.
Hardware: 10 minutes
45.
48.
216.
50.
TX1330 M4