3.4
Power Supply Method
USB bus power of the PC is used as the power supply for the simple AV system board.
Connect the Type A side of the USB cable (with Type A - Type B connector) to the USB
port of the PC and connect the Type B side to the USB power supply connector of the simple
AV system board.
Press down the power switch with the USB cable connected. The power supply switch is
self-locking and stays depressed while the power is on. To turn the power off, press the
power switch again.
Figure 7 USB Cable Insertion Position for Power Supply
USB Connector for Power Supply
Select your favorite music!
USB Cable (B Connector Side)
12
AN706-00040-2v0-E