Table of Contents
Advertisement
Setting up the machine
7
7.1 Adjusting the clamp rail
7.1.1 Adjusting the downforce pressure of the clamp rail
Fig. 9: Adjusting the downforce pressure of the clamp rail (1)
(1) - Clamp rail
The pressure of the clamp rail (1) exerted on the working plate changes
with decreasing height H.
To adjust the downforce pressure of the clamp rail:
1. Check to see if the main clamp exerts pressure on the sewing piece
Service Instructions 2112-5 - 00.0 - 02/2020
Setting up the machine
WARNING
Risk of injury from pointed and sharp parts!
Cutting and puncture possible.
Switch off the machine before you set up the
machine.
Do NOT reach into the area of the cutters or
the needle.
WARNING
Risk of injury from moving parts!
Crushing possible.
Switch off the machine before you set up
the machine.
evenly along the entire length of the rail.
To do so, position a piece of fabric at the loading position and lower
the main clamp.
①
19
Advertisement
Table of Contents
