Table of Contents
Advertisement
4.1.1
User submenu
No.
Parameter name
T1.1.1
Max. speed
T1.1.2
Speed basting stitches
T1.1.3
Move out the scissors
T1.1.4
Lip tension before the
upper bartack
T1.1.5
Lip tension before the
lower bartack
T1.1.6
Lip tension before the
lip back
T1.1.7
Lip tension before the lip
there
T1.1.8
Lip tension after the
seam beginning
4.1.2
Submenu for soft start setting
No.
Parameter name
T1.2.1
Number of stitches
T1.2.2
Speed
4.1.3
Submenu for determining the equipment
No.
Parameter name
T1.3.1
Cage width
T1.3.2
Free cage width
T1.3.3
Cage length
T1.3.4
Free cage length
T1.3.5
Knife length
T1.3.6
Pressure monitor
8
Symbol
Range
200 ... 4000
200 ... 4000
0 ... 10
0 ... 10
0 ... 10
0 ... 10
0 ... 10
0 ... 10
Symbol
Range
0 ... 10
200 ... max.
sewing speed
according to T1.1.1
Symbol
Range
3, 4, 6, X mm
1,0 ... 6,0 mm
17, 22, 35, 48,
70, X mm
10,0 ... 70,0 mm
1,0 ... 70,0 mm
0 / 1
Description
Setting of the maximum speed in the
sewing mode.
The speed can be altered in steps of
100.
Setting of the speed for the basting
stitches
Number of stitches after which the
scissors moves out and releases the
clamped needle thread
Number of stitches before the upper
bartack with the bartack tension
switched on
Number of stitches before the lower
bartack with the bartack tension
switched on
Number of stitches before the lip
back with the lip tension switched on
Number of stitches before the lip
there with the lip tension switched
on
Number of stitches after the seam
beginning after which the lip tension
is switched on.
Only valid for taper bars.
Description
Number of stitches of the soft start
Speed for the soft start
Description
Selection of the cage width
Only visible if cage width X has been
selected for T1.4.1.
Enter value for cage width.
Selection of the cage length
Only visible if cage length X has
been selected for T1.4.3.
Enter value for cage length.
Length of the knife used.
(Default-Value: 3.5 mm)
Pressure monitor available
Hide quick links:
Advertisement
Table of Contents
