Omron ZJ-SD Series User Manual page 106

Section 6
Changing the Number of Display Digits
Changing the Number of Display Digits
Select the number of digits (0 to 5) for the main and sub-displays in the RUN mode. The
default setting is five digits. When four or less digits are set, the digits are disabled from the
rightmost digit first.
If zero (0) digits are set, all the digital displays go out.
Moving to FUN and SPCL
1.
Set the mode switch to FUN.
2.
Use the LEFT and RIGHT keys to display
[SPCL] on the main display.
Moving to DIGIT
3.
Press the UP or DOWN key.
The sub-display flashes.
4.
Use the UP and DOWN keys to display
[DISP] or [ALL].
5.
Press the ENT key.
6.
Use the LEFT and RIGHT keys to display
[DIGIT] on the main display.
Selecting the number of display digits
7.
Press the UP or DOWN key.
The sub-display flashes.
8.
Use the UP and DOWN keys to select the
desired number of display digits.
9.
Press the ENT key to confirm the setting.
ZJ-SD
92
User's Manual