Table of Contents
Advertisement
Section 5
Entering Threshold Values
Setting threshold values
3.
Start measurement.
Measurement continues for the duration that the ENT
and RIGHT keys are held down.
[AUTOT] flashes on the sub-display.
4.
To end measurement, release the ENT and
RIGHT keys.
The maximum measured value during the measurement
period is set as the HIGH threshold value and the
minimum measured value is set as the LOW threshold
value.
The new threshold value (either HIGH or LOW,
depending on the threshold switch setting) is displayed
on the sub-display.
When [ERRLH] is displayed p.65
The threshold values set using automatic teaching can also be changed using direct input. This is
useful when setting judgment tolerances for measured values.
ZJ-SD
68
User's Manual
p.65
Advertisement
Table of Contents
