Moving to the FUN mode and SPCL
1.
Set the mode switch to FUN.
2.
Use the LEFT and RIGHT keys to display
[SPCL] on the main display.
Moving to ZRMEM
3.
Press the UP or DOWN key.
The sub-display flashes.
4.
Use the UP and DOWN keys to display [ETC]
or [ALL].
5.
Press the ENT key.
6.
Use the LEFT and RIGHT keys to display
[ZRMEM] on the main display.
Selecting whether or not to enable zero reset memory
7.
Press the UP or DOWN key.
The sub-display flashes.
8.
Select either [ON] or [OFF].
ON: Zero reset memory enabled
OFF: Zero reset memory disabled (default)
9.
Press the ENT key to confirm the setting.
This registers the setting.
Correcting the Measurement Reference Voltage
Section 3
ZJ-SD
39
User's Manual