Table of Contents
Advertisement
Changing Display Scales
Change the display scale when you want to display a value on the main display that is different
from the actual measured value.
Place an actual sensing object in position.
Two setting methods are available: one-point and two-point scaling.
•
The scaling values set here are reflected in the display only.
To change the linear output of the displayed value, the monitor focus function must be used.
The minimum display value is -19999, and the maximum display value is 59999.
p.70
•
The settings below return to their default settings when scaling is set.
Make the settings for these items after scaling settings are completed.
Self-trigger level p.59
Threshold p.36
One-point Scaling
Measurement is performed at one point and offset values are set for that measured
value.
The offset and increment/decrement reversal (display inversion) can be set.
Moving to the FUN mode and SCALE
1.
Set the mode switch to FUN.
2.
Use the LEFT and RIGHT keys to display
[SCALE] on the main display.
Displayed value
(kV)
50
40
40
Section 6
Changing Display Scales
Actual measured value
(kV)
User's Manual
ZJ-SD
99
Advertisement
Table of Contents
