Table of Contents
Advertisement
Setting the hysteresis width (when [DIST] is selected as the hold trigger)
13.
Use the LEFT and RIGHT keys to display
[H-HYS] on the main display.
H-HYS is not displayed if timing input [TIMNG] is set as
the trigger.
14.
Press the UP or DOWN key.
The leftmost digit of the sub-display flashes.
15.
Use the cursor keys to set the hysteresis
width for the trigger level.
16.
Press the ENT key to confirm the setting.
This registers the hysteresis width.
Section 5
Using the Hold Functions
Moves from one digit to
another.
Changes the numeric value.
User's Manual
ZJ-SD
61
Advertisement
Table of Contents
