Omron ZJ-SD Series User Manual page 97

Moving to the FUN mode and OUTPT
1.
Set the mode switch to FUN.
2.
Use the LEFT and RIGHT keys to display
[SPCL] on the main display.
3.
Press the UP or DOWN key.
The sub-display flashes.
4.
Use the UP and DOWN keys to display [ETC]
or [ALL].
5.
Press the ENT key.
6.
Use the LEFT and RIGHT keys to display
[OUTPT] on the main display.
Selecting the output type
7.
Press the UP or DOWN key.
The sub-display flashes.
8.
Select the output type.
When a warning level is set, select [WARN], and when
not set, select [STAND].
9.
Press the ENT key to confirm the setting.
This registers the setting.
When [WARN] is selected, set the warning level.
Setting the Warning Level (Output type)
Section 5
ZJ-SD
83
User's Manual