Omron ZJ-SD Series User Manual page 100

Section 5
Using the Area Correction Function
Moving to the FUN mode and AREA
1.
Set the mode switch to FUN.
2.
Use the LEFT and RIGHT keys to display
[AREA] on the main display.
Selecting area correction
3.
Press the UP or DOWN key.
The sub-display flashes.
4.
Select whether or not to enable the area
correction function.
To use the area correction function, select [ON].
5.
Press the ENT key to confirm the setting.
This registers the setting.
Next, set the area size if [ON] is selected.
Setting the area size (only when [ON] is selected)
6.
Use the LEFT and RIGHT keys to display
[SIZE] on the main display.
SIZE is not displayed if [OFF] is selected.
7.
Press the UP or DOWN key.
The leftmost digit of the sub-display flashes.
ZJ-SD
86
User's Manual