Omron ZJ-SD Series User Manual page 77

Setting the delay time
5.
Use the LEFT and RIGHT keys to display [H-
D-T] on the main display.
H-D-T is not displayed if the H-DLY function is set to
OFF.
6.
Press the UP or DOWN key.
The leftmost digit of the sub-display flashes.
7.
Enter the delay time (ms).
8.
Press the ENT key to confirm the setting.
This registers the delay time.
Setting the sampling period
9.
Use the LEFT and RIGHT keys to display [H-
S-T] on the main display.
H-S-T is not displayed if the H-DLY function is set to OFF.
10.
Press the UP or DOWN key.
The leftmost digit of the sub-display flashes.
11.
Use the cursor keys to enter the sampling
period (ms).
12.
Press the ENT key to confirm the setting.
This registers the sampling period.
Section 5
Using the Hold Functions
Moves from one digit to
another.
Changes the numeric value.
Moves from one digit to
another.
Changes the numeric value.
User's Manual
ZJ-SD
63