Table of Contents
Advertisement
Section 2
Connections
Interface Unit
Use an Interface Unit to connect a personal computer to the Smart Sensor system.
■ Connection Method
1.
Open the connector cover on the Amplifier Unit.
Open the connector cover by lifting and sliding it open.
2.
Mount the Interface Unit onto the DIN Track.
3.
Slide and connect the Interface Unit to the Amplifier Unit connector.
To disconnect the Interface Unit, perform the above operations in reverse order.
• When two or more Amplifier Units are used, connect the Interface Unit to the Amplifier Unit with
• Communication with the static electricity Smart Monitor is possible via the Interface Unit.
ZJ-SD
22
User's Manual
2
the highest channel number.
p.124
3
1
Advertisement
Table of Contents
