Table of Contents
Advertisement
Figure 3: Disconnecting the power cord
▶ Disconnect the power cord from the PSU.
4.4
Getting access to the component
4.4.1
Safety notes
CAUTION
▶
Only for non-hot plug components:
● Before removing or attaching covers, turn off the server, all
peripheral devices, and any other connected devices.
● Because there is a risk of electric shock or damage, please
disconnect all power cords from the outlet.
▶
The top cover must be replaced as soon as possible for purposes
of cooling, to comply with EMC regulations (regulations regarding
electromagnetic compatibility) and to prevent fires.
▶
For more information, see
RX2450 M1
"Important information" on page
Upgrade and Maintenance Manual
Basic hardware procedures
25.
39
Advertisement
Table of Contents
