Fujitsu PRIMERGY RX2450 M1 Upgrade And Maintenance Manual page 123

Figure 89: Preparation for the cable routing (B)
▶ Remove the cables CBL-SAST-1295-100 and cable CBL-SAST-1257-100.
▶ Cut and remove four cable ties (see blue circles).
▶ Disconnect the cables from the HDD backplane and the system board
(see orange circles).
▶ Thread the cable through the fan bracket and remove it front ward.
Please press latch of cable plug to avoid interference between the cable
plug and the fan bracket.
Figure 90: Preparation for the cable routing (C)
RX2450 M1 Upgrade and Maintenance Manual
Expansion cards and riser cards
123