Basic Hardware Procedures; Using Diagnostic Information; Locating The Defective Server; Locating The Defective Component - Fujitsu PRIMERGY RX2450 M1 Upgrade And Maintenance Manual

4

Basic hardware procedures

4.1

Using diagnostic information

4.1.1

Locating the defective server

Use the ID indicators for easy identification of the server, especially when
working in a datacenter environment or a server room:
▶ Press the ID button on the I/O panel or use the IPMI to switch on the ID
identicators.
4.1.2

Locating the defective component

Indicators on the components and onboard indicators on the system board
allow you to identify the defective component.
Possibilities to get more information about the defective component
– Checking the System Event Log (SEL), see
BMC web interface" on page
– Checking the indicators on the components, see
indicators" on page
– Checking the onboard indicators on the system board.
4.2

Shutting down the server

CAUTION
▶
For more information, see
This step is only required when upgrading or replacing non-hot-plug
components.
RX2450 M1
71.
202.
"Important information" on page
Upgrade and Maintenance Manual
"Viewing the SEL using the
"Connectors and
25.
37