▶ Remove all memory modules, see
page
163.
Before removing the memory modules, take a note on the installation
slot number for each memory module. Ensure that you reinstall the
memory modules in the slot they were located before the
replacement.
▶ Remove all fans, see
Removing the defective system board
▶ Disconnect all cables from the system board.
Figure 157: Removing the plastic air duct
▶ Remove the two screws (see circles).
▶ Remove the plastic air duct upward.
RX2450 M1
"Removing memory modules" on
"Removing the defective fan module" on page
Upgrade and Maintenance Manual
System board and components
101.
195