Fujitsu PRIMERGY RX2450 M1 Upgrade And Maintenance Manual page 89

Hard disk drive (HDD) / solid state disk (SSD)
Installing a 2.5-inch HDD/SSD module
Figure 53: Installing a 2.5-inch HDD/SSD (A)
▶ Insert the HDD/SSD in the installation frame with the connector end toward
the rear of the installation frame.
Figure 54: Installing a 2.5-inch HDD/SSD (B)
▶ Hold the HDD/SSD in place and turn around the installation frame.
▶ Fasten the HDD/SSD with four screws to the installation frame.
RX2450 M1 Upgrade and Maintenance Manual 89