Table of Contents
Advertisement
System board and components
▶ Install all riser modules, see
▶ Install all PSUs, see
▶
"Reassembling" on page
▶
"Connecting the power cord" on page
▶ Connect all external cables.
▶
"Switching on the server" on page
▶
"Verifying the system time settings" on page
▶
"Updating or recovering the BIOS and BMC" on page
▶
"Looking for the MAC address of a LAN controller" on page
▶
"Updating the NIC configuration file in a Linux environment" on page
▶ If applicable, reconfigure your network settings in the operation system
according to the original configuration of the replaced controller (expansion
card).
198
"Installing a riser module" on page
"Installing a hot-plug PSU" on page
44.
48.
49.
Upgrade and Maintenance Manual
76.
70.
68.
73.
54.
71.
RX2450 M1
Advertisement
Table of Contents
