Connecting The Power Cord - Fujitsu PRIMERGY RX2450 M1 Upgrade And Maintenance Manual

Basic hardware procedures
▶ Fasten the server to the rack cabinet with the knurled screws (see circles).
▶ Connect all cables except the power cord to the server rear.
4.6

Connecting the power cord

4.6.1 Connecting the power cord
CAUTION
The AC PSU adjusts automatically to any mains voltage in the range
from 100 V - 127 V or 200 V - 240 V.
▶
You may only operate the server enclosure if its rated voltage range
corresponds to the local mains voltage.
Figure 11: Connecting the power cord
▶ Connect the power cord to the PSU.
48 Upgrade and Maintenance Manual RX2450 M1