Table of Contents
Advertisement
Expansion cards and riser cards
Preliminary steps
▶
"Shutting down the server" on page
▶
"Disconnecting the power cord (AC PSU)" on page
▶
"Getting access to the component" on page
▶ Remove the riser module 1, see
Installing the RAID controller in riser module 1
Figure 67: Removing the slot cover
▶ Remove the screw (see circle) and remove the slot cover.
CAUTION
▶
Keep the slot cover for future use.
▶
If the expansion card is removed and not replaced with a new
one, the slot cover must be reinstalled due to cooling, to comply
with applicable EMC regulations and to protect against fire.
106
37.
"Removing the riser module 1" on page
Upgrade and Maintenance Manual
38.
39.
51.
RX2450 M1
Advertisement
Table of Contents
