Expansion cards and riser cards
9.4.3
Replacing a GPU card from riser module 1
Upgrade and Repair Unit
(URU)
Tools:
– Phillips PH1 / (+) No. 1 screw driver
– Phillips PH2 / (+) No. 2 screw driver
Preliminary steps
▶
"Locating the defective server" on page
▶
"Shutting down the server" on page
▶
"Disconnecting the power cord" on page
▶
"Getting access to the component" on page
▶
"Locating the defective component" on page
▶ Remove the riser module 1, see
Removing the defective GPU card
The GPU card can only be installed in slot 3 for riser module 1.
▶ Remove the GPU card, see
on page
129.
Installing the new GPU card
▶ Install the GPU card, see
page
125.
Concluding steps
▶ Install the riser module 1, see
▶
"Reassembling" on page
▶
"Connecting the power cord" on page
132
37.
"Removing the riser module 1" on page
"Removing the GPU card from riser module 1"
"Installing the GPU card in riser module 1 " on
"Installing the riser module 1" on page
44.
48.
Upgrade and Maintenance Manual
Hardware: 15 minutes
37.
38.
39.
37.
51.
54.
RX2450 M1