Preliminary steps
▶
"Shutting down the server" on page
▶
"Disconnecting the power cord" on page
▶
"Getting access to the component" on page
▶ Remove the riser module 2, see
Removing the GPU card from riser module 2 (slot 1)
▶ Disconnect the power cable from the GPU card and the system board.
Figure 109: Removing the screws on the back side
▶ Remove the two screws on the back side of the riser module 2 (see circles).
RX2450 M1
37.
"Removing the riser module 2" on page
Upgrade and Maintenance Manual
Expansion cards and riser cards
38.
39.
52.
137