Table of Contents
Advertisement
▶
"Shutting down the server" on page
▶
"Disconnecting the power cord (AC PSU)" on page
▶
"Getting access to the component" on page
Replacing the defective CMOS battery
1
Figure 156: Replacing the CMOS battery
▶ Press the locking spring into direction of the arrow (1), so that the CMOS
battery jumps out of its socket.
▶ Remove the CMOS battery (2).
CAUTION
Sharp tools such as screw drivers might damage system board
components in case of slipping.
▶
If the CMOS battery cannot be ejected without the help of a tool,
it is recommended to use a tooth pick.
▶ Insert a new CMOS battery of the same type into the socket (3) and (4).
Concluding steps
▶ Dispose of the CMOS battery in accordance with local regulations
concerning special waste.
▶
"Reassembling" on page
▶
"Connecting the power cord" on page
RX2450 M1
37.
2
44.
Upgrade and Maintenance Manual
System board and components
38.
39.
3
48.
4
193
Advertisement
Table of Contents
