Fujitsu PRIMERGY RX2450 M1 Upgrade And Maintenance Manual page 120

Expansion cards and riser cards
Configuration with one RAID controller
SAS#2
SAS#3
SAS#4
SAS#5
Figure 84: Routing cables 4x CBL-SAST-0531 (A)
Figure 85: Routing cables 4x CBL-SAST-0531 (B)
▶ Connect the four cables to the connectors "SAS#2", "SAS#3", "SAS#4" and
"SAS#5" on the HDD backplane and to the connectors "C0", "C1", "C2" and
"C3" on the RAID controller.
▶ Thread the cables through the fan bracket.
▶ Fasten the cables with three cable ties (see blue circles).
▶ Fasten the cables with the cable holder (see orange circle).
120 Upgrade and Maintenance Manual RX2450 M1