▶ Connect the FFC cable (2).
Power control cable routing
Figure 154: Overview of the system board connector JF1
Figure 155: Routing the power control cable
● The red color line on the cable is used to align the location of JF1 pin 1.
▶ Place the power control cable to the system board connector JF1.
Ensure that the cable is flat and does not cross over the memory slot.
Concluding steps
▶
"Reassembling" on page
▶
"Connecting the power cord" on page
RX2450 M1
44.
48.
Upgrade and Maintenance Manual
Front panel
189