System Board; Replacing The System Board - Fujitsu PRIMERGY RX2450 M1 Upgrade And Maintenance Manual

System board and components
▶
"Switching on the server" on page
▶ BIOS settings are automatically reloaded. Time and date must be set
manually, see "Verifying the system time settings" on page
13.4

System board

13.4.1

Replacing the system board

Field Replaceable Unit
(FRU)
Tools: Replacing the system board:
– Phillips PH2 / (+) No. 2 screw driver
– Hexagon 7 mm screw driver (for stand-offs)
– Magnifying glass for inspecting CPU socket springs
(recommended)
Preliminary steps
▶
"Locating the defective server" on page
▶
"Verifying the system time settings" on page
▶
"Shutting down the server" on page
▶
"Disconnecting the power cord (AC PSU)" on page
▶ Disconnect all external cables.
▶
"Getting access to the component" on page
▶ Remove all PSUs, see
▶ Remove all riser modules, see
▶ Remove all air ducts, see
▶ Remove the AOC card and the corresponding riser card, see
the defective riser card" on page
194
49.
37.
"Removing a hot-plug PSU" on page
"Removing a riser module" on page
"Removing the air ducts" on page
141.
Upgrade and Maintenance Manual
Hardware: 40 minutes
Software: 20 minutes
37.
70.
38.
39.
70.
79.
50.
62.
"Removing
RX2450 M1