Hard disk drive (HDD) / solid state disk (SSD)
▶ Connect all cables to the HDD backplane.
For the cable plan, see
Concluding steps
▶ Insert all HDD/SSD modules, see
on page
85.
Make sure that you reinstall the HDD/SSD module in the bay it was
located before the HDD backplane replacement.
▶
"Reassembling" on page
▶
"Connecting the power cord" on page
▶
"Switching on the server" on page
98
"Appendix B" on page
"Installing 2.5-inch HDD/SSD modules"
44.
48.
49.
Upgrade and Maintenance Manual
219.
RX2450 M1