Fujitsu PRIMERGY RX2450 M1 Upgrade And Maintenance Manual page 141

Preliminary steps
▶
"Locating the defective server" on page
▶
"Shutting down the server" on page
▶
"Disconnecting the power cord" on page
▶
"Getting access to the component" on page
▶
"Locating the defective component" on page
▶ Remove the riser module 1, see
Removing the defective riser card
▶ Remove the expansion card, see
module 1" on page 108
from riser module 1" on page
Figure 113: Removing the riser card from riser module 1
▶ Remove the four screws (see circles).
▶ Remove the riser card.
Installing the new riser card
▶ Insert the riser card.
▶ Fasten the four screws (see
▶ Install the expansion card, see
module 1" on page 106
riser module 1 " on page
RX2450 M1
37.
"Removing the riser module 1" on page
"Removing the RAID controller from riser
and the GPU card, see
129.
Figure 113).
"Installing the RAID controller in riser
and the GPU card, see
125.
Upgrade and Maintenance Manual
Expansion cards and riser cards
37.
38.
39.
37.
"Removing a GPU card
"Installing the GPU card in
51.
141