Expansion cards and riser cards
Preliminary steps
▶
"Shutting down the server" on page
▶
"Disconnecting the power cord" on page
▶
"Getting access to the component" on page
▶ Remove the riser module 1, see
Removing the RAID controller from riser module 1
▶ If necessary, disconnect the cables from the RAID controller.
Figure 69: Removing the RAID controller
▶ Remove the screw from the slot bracket (see circle).
▶ Pull out the RAID controller from the PCIe slot.
Figure 70: Installing the slot cover to slot 4
108
37.
"Removing the riser module 1" on page
Upgrade and Maintenance Manual
38.
39.
51.
RX2450 M1