Installing The Server In The Rack - Fujitsu PRIMERGY RX2450 M1 Upgrade And Maintenance Manual

▶ Place the cover onto the chassis (1).
▶ Push the cover to the front side (2).
▶ Fasten the cover with one screw on each side (3).
4.5.3

Installing the server in the rack

CAUTION
At least two people are needed to position the server on the rack rails.
(For Japan, see "安全上のご注意".)
RX2450 M1
For configurations below 32 kg:
At least two people are needed to lift the server into the
rack cabinet.
For configurations below 55 kg:
At least three people are needed to lift the server into
the rack cabinet.
For configurations above 55 kg:
At least four people are needed to lift the server into the
rack cabinet.
Upgrade and Maintenance Manual
Basic hardware procedures
45