Fujitsu PRIMERGY RX2450 M1 Upgrade And Maintenance Manual page 86

Hard disk drive (HDD) / solid state disk (SSD)
Preliminary steps
▶ Locate the correct drive bay, see
Removing a 2.5-inch HDD/SSD dummy module
The dummy module is installed in the installation frame of the HDD/SSD
module.
Figure 49: Opening the locking lever
▶ Pinch the green release button and open the locking lever.
86
"Overview of configurations" on page
Upgrade and Maintenance Manual
84.
RX2450 M1