Table of Contents
Advertisement
▶
"Switching on the server" on page
9.4.4
Installing a GPU card in riser module 2
Upgrade and Repair Unit
(URU)
Tools:
– Phillips PH1 / (+) No. 1 screw driver
– Phillips PH2 / (+) No. 2 screw driver
The GPU card can only be installed in slot 1 for riser module 2.
Preliminary steps
▶
"Shutting down the server" on page
▶
"Disconnecting the power cord" on page
▶
"Getting access to the component" on page
▶ Remove the riser module 2, see
Installing the GPU card in riser module 2 (slot 1)
Figure 103: Removing the slot covers
RX2450 M1
49.
37.
"Removing the riser module 1" on page
Upgrade and Maintenance Manual
Expansion cards and riser cards
Hardware: 10 minutes
38.
39.
52.
133
Advertisement
Table of Contents
