Table of Contents
Advertisement
Expansion cards and riser cards
Figure 97: Fastening the top side of the GPU
▶ Fasten the GPU on the top side with two screws (see circles).
▶ Connect the power cable to the GPU.
▶ Connect the power cable to connector "GPU PWR3" on the system board.
▶ Install the riser module 1, see
"Installing the riser module 1" on page
54.
Figure 98: Routing of the GPU power cable
▶ Route the GPU power cable as shown.
128
Upgrade and Maintenance Manual
RX2450 M1
Advertisement
Table of Contents
