Fujitsu PRIMERGY RX2450 M1 Upgrade And Maintenance Manual page 102

Fans
Installing the new fan module
Figure 64: Installing the fan module
▶ Insert the fan module into the chassis (1).
▶ Connect the corresponding fan cable to the system board (2).
Concluding steps
▶
"Installing the top cover" on page
▶
"Reassembling" on page
When a system fan module fails, the remaining fans will start
operating at full speed. After the defective fan module has been
replaced, all fans will continue to run at full speed for a couple of
minutes, before resetting to a lower speed.
Ensure that all system fans reset to a normal operating speed.
102
44.
44.
Upgrade and Maintenance Manual RX2450 M1