6. Pull up the black lever on the right side of the heatsink/fan assembly to loosen
the metal latch from the hook on the retaining bracket (see
Unlatching the Heatsink/Fan Assembly
FIGURE 4-36
7. Push down the metal latch on the left side of the assembly to loosen the latch
from the hook on the retaining bracket (see
8. Twist the heatsink/fan assembly to the right or the left, in order to break the seal
with the thermal grease.
FIGURE 4-36
).
FIGURE 4-36
Chapter 4 Maintaining the Workstation
).
4-47