Removing The Front Bezel; Figure 4-2 Releasing The Bezel Tabs - Sun Microsystems Ultra 20 User Manual

4.3.2

Removing the Front Bezel

1. Remove the left-side access panel.
2. Loosen the four bezel tabs (see
Facing the left-front side of the bezel and starting with the topmost tab, carefully
push each bezel-mounting tab about a millimeter and forward slightly.
As you do this, you can see the edge of the bezel nearest the tab move slightly away
from the front of the chassis.
Caution – Be very careful when pulling the bezel away from the chassis. Applying
too much force might cause the bezel to break.
FIGURE 4-2
Releasing the Bezel Tabs
).
FIGURE 4-2
Chapter 4 Maintaining the Workstation 4-5