4. Push forward the two latches on the left side of the fan bracket, and attach the
four hooks on the back of the bracket to the four corner holes in the back chassis
grill (see
FIGURE 4-25
Installing the System Fan
FIGURE 4-25
5. Release the latches on the left of the fan after the fan is secured to the chassis.
6. Connect the fan cable to the Fan 1 connector on the motherboard.
Refer to
FIGURE 4-34
Fan 1 connector.
).
or the service label on the system cover for the location of the
Chapter 4 Maintaining the Workstation
4-33