5. Push forward the two latches on the left side of the fan bracket, and pull the fan
to the left to release the four hooks on the back of the bracket from the holes in
the chassis (see
FIGURE 4-24
6. Pull the fan away from the chassis.
4.5.7.2
Installing the System Fan
1. Remove the left-side access panel, if necessary.
2. Remove the new fan from its package.
3. Locate the four corner holes in the chassis grill where the fan tabs will be
installed.
4-32
Sun Ultra 20 Workstation User Guide • August 2006
).
FIGURE 4-24
Removing the System Fan